It can be used as a place card, decoration on the table or you can put a little attention inside and give it away as a small gift. If you are extra handy, you can make a GIGA Bonbon and use it as a decoration or maybe even as a Pinjata!
TIPS FOR PAPER:
Use a paper with a thickness between 150g and 200g.
THIS IS WHAT YOU NEED:
- Cutting mat
- False leg
- Cutting knife
- Scissors
- Glue or "Glue dots"
- A little twine
Not feeling quite dexterous? You're in luck, because then we have a punching machine you can borrow in the Paper Department here at Norway Designs! Choose a paper and use our punching machine to punch out the Bonbon. The machine is easy to use and we also have many other forms. And it's free to use! Ask our paper geeks for assistance.
Step 1 : Print this TEMPLATE on a paper of the desired colour. The template is in A4, but it is perfectly fine to print out the template on an A3 sheet. Remember to select A3 in the printer dialog and to enlarge the printout to A3.
Step 2 : Cut/cut out the Bonbon
Step 3: Along the dotted lines, use a folding knife and score fold edges on the paper. To get sharp and nice folding edges, we recommend pre-folding all folding edges on the paper.
Step 4: Use glue and attach the last field to the first field of the Bonbon.
Step 5: Use a small string to close the Bonbon at both ends. Did you leave a gift inside?
Hurray! If you think the process is a bit time-consuming, we remind you of our punching machine in the paper department. Then you just need to fold it and glue it together!
